Net2Phone 2-Port Gateway, Руководство пользователя

Страница: 22 / 89

2-Port Gateway User’s Guide
16
Note: Do not be concerned if you do
not have Internet connectivity at this
point. This issue will most likely be
resolved once you configure the 2-
Port Gateway based on your
broadband WAN setup.
WAN Configuration
Using DHCP Addressing
The 2-Port Gateway’s default WAN configuration
utilizes DHCP (Dynamic Host Configuration
Protocol) for obtaining IP address parameters. If
your WAN is using DHCP, the 2-Port Gateway’s
IP address parameters were configured
automatically when you connected it to your
broadband service connection (corporate WAN,
cable/DSL modem, or router).
Note: If your broadband service
provider uses PPPoE, please refer to
Setting up Point -to-Point Protocol
over Ethernet (PPPoE) on pages 23
and 24 in this section to configure
PPPoE settings.
If your WAN uses static IP addressing, please
refer to Using Static IP Addressing on the next
page.