manualshive.com logo in svg

Ness Premium H.264 DVR, Руководство по установке

Поделиться
Скачать
Ness Premium H.264 DVR Скачать руководство пользователя страница 74

User’s Manual

 

 

74

< Select Device > 

The available external devices for exporting video will be listed by name and free size in 
Select Device menu. The Select Device menu displays as follows. 
 

Select Device 

Device Name 
xxx-xxx-x-x-xx 
xx-xxx-xx-xxxx 

Available

256 MB

1.5 GB

Sel   

No   
No       

 
The

 Premium H.264 DVR

 only supports EXT3 file system. Make sure the HDD format is 

EXT3 before connecting it with the unit. If not, please format the HDD to EXT3 format first. 
 

Device Name 

The item shows the name of the available device. 

 

Available 

The item shows the free space of the available device. 

 

Sel 

Set the item to <Yes> to set it as an exporting destination; or <No> to cancel. 

 

NOTE:

 The item <Erase Disk> from Video Export menu will be grayed out 

when the selected device is not a DVD+RW or when the device is not selected 

yet.  

 

< Select Channel > 

The item is used to select channels for export. Move the cursor to the desired channel 
using LEFT / RIGHT keys, select or de-select a channel by pressing ENTER. 

 

Содержание Premium H.264 DVR











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды