manualshive.com logo in svg

Ness Premium H.264 DVR, Руководство по установке

Поделиться
Скачать
Ness Premium H.264 DVR Скачать руководство пользователя страница 22

User’s Manual

 

 

22

- DNS 

DNS is the abbreviation for “Domain Name System”, which is an 
Internet service that translates domain names (eg: www.DNS.com) 
into IP addresses. It helps to make our life easier because we do net 
have to memorize IP address but just the domain names, which are 
easier to be memorized.   

 

The item allows users to specify the IP address of the Domain Name 
System associated with the unit. To configure this item, DHCP must 
be set to <OFF>. 

 

If the network server is unavailable when using DHCP, the unit 
searches for the network server and boots up slower than as usual. 
The search of network continues until it times out. 
 

- PPPoE 

Account 

The item allows user to setup the PPPoE login username.   

 

NOTE: 

For accessing the PPPoE settings, select <PPPoE> 

as the Network Type in Network Setup menu. 

 

To setup the login username, follow the steps: 

•

  Select <PPPoE Account> from LAN Setup menu and press 

ENTER. A virtual keyboard displays.

 

 

PPPoE Account 

 

 

 

A B C D E F G H I J K L  M 

N O P Q R S T U V W X Y  Z 

a b c d e f g h i

j k l  m 

n o p q r s t u v w x y  z 
0 1 2 3 4 5 6 7 8 9

.

! @ 

#

−

_ , ”  + = *           

◄

►

Backspace   Delete 

Cancel

OK 

 

 

•

  Use Direction keys to move the cursor to the desired character.   

•

  Press ENTER to add the character to the username entry field.   

•

  When it’s done, move the cursor to <OK> and press ENTER to 

save the setting and exit. 

Содержание Premium H.264 DVR











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды