background image

2

IntroductIon

Ness LUX wired PIR is a unique high performance 
motion detector with a white LED night-light.
LUX features include 15m x 15m detection cover-
age, look-down creep zone with adjustable mask-
ing,    selectable  standard  or  Pet  Aware  modes, 
high RF immunity, white light immunity, adjustable 
digital range, adjustable digital pulse count.
LUX also has built-in support for home automa-
tion functions with a fast response motion sensor 
output designed to feed to automation systems.
LUX has a wide power input range of 10~15VDC 
designed  to  operate  on  all  Ness  alarm  control 
panels and automation systems.
For  safety  and  convenience,  LUX’s  night-light 
function provides a motion-activated cone of light 
to help you find your way at night. The night-light 
operates for 25 seconds when activated and will 
remain lit as long as it detects motion, while the 
built-in ambient light sensor helps save power by 
enabling the night-light only in the dark.
Ness  LUX’s  “capsule”  design  protects  sensitive 
electronic components and provides easy access 
to the terminals and dipswitches.

detectIon coverage

At  the  recommended  mounting  height  of 
2.1m~2.3m, LUX detector coverage is up to 15m  
(HIgH range setting) or 12m (LOW range setting).

Pet aware Mode

In Pet Aware mode (see Settings) the lower detection zones are masked by the sensor mask while the 
upper detection zones are optimised for detecting humans.
If using the optional Quantum Swivel bracket, ensure that the detector is not tilted downwards to prevent 
the upper detection zones from intersecting the floor. 
Note that in Pet Mode detection sensitivity will be reduced closer to the floor. You may need to use the 
optional Quantum swivel bracket to adjust the coverage for a balance of detection coverage for human 
and pets. 

 Installing the detector lower than 2.1metres may result in false detection of animals.

2.1m

~

2.3m

0.3m

1m

3m

6m

15m

Coverage pattern shown is with the sensor mask 
in position 1 (no masking).

Install at least 2.1m away from furniture to prevent detection of climbing pets.

2.1m ~ 2.3m

Содержание LUX









Отзывы: