Neousys Nuvo-6108GC Series, Руководство пользователя

Страница: 89 / 115

Nuvo-6108GC/ Nuvo-6108GC-IGN
89
4.1.2 SATA Configuration
The SATA controller of your system supports two (2) operating modes: AHCI and
RAID mode. The AHCI mode, which exposes SATA's advanced capabilities such as
hot swapping and native command queuing, is supported in several later version of
operating systems. RAID mode provides reliable data storage (RAID 0/ 1/ 5/ 10) or a
higher throughput (RAID 0). No additional H/W or driver is needed to use RAID
function.
Recommended SATA controller mode settings:

If you’re using Windows Vista, Windows 7/ 8/ 10, or Linux kernel 2.6.19 or later,
you can select AHCI mode for better performance.

If you’re installing two 2.5” HDD/ SSD and looking for data striping (RAID 0) or
data mirroring (RAID 1), you can select RAID mode to utilize built-in RAID.
To set SATA controller mode:
1. When system boots up, press F2 to enter BIOS setup utility.
2. Go to [Advanced] > [SATA Configuration] .