Neousys Nuvo-6108GC Series, Руководство пользователя

Страница: 101 / 115

Nuvo-6108GC/ Nuvo-6108GC-IGN
101
4.1.11 Watchdog Timer for Booting
The watchdog timer secures the boot process by means of a timer. Once the timer
expires, a reset command is issued to initiate another booting process. There are
two options in BIOS menu, “ Automatically after POST ” and “ Manually after Entering
OS ”. When “ Automatically after POST ” is selected, the BIOS automatically stops the
watchdog timer after POST (Power-On Self Test) OK. When “ Manually after Entering
OS ” is selected, the user must stop the watchdog timer once booted into the OS.
This guarantees the system can always boot into the OS, otherwise another booting
process will be initiated. For information about programming watchdog timer, please
refer to Watchdog Timer & Isolated DIO .
To set the watchdog timer for boot in BIOS:
1.
When system boots up, press F2 to enter BIOS setup utility.
2. Go to [Boot] menu.
3.
Disable or select timeout value for [WDT for Booting] option.
4.
Once you give a timeout value, the [WDT Stop Option] option appears. You
can select “Automatically after POST” or “Manually after Entering OS” .
5.
Press F10 to “Exit Saving Changes.