Neousys Technology Nuvo-3100 Series Скачать руководство пользователя страница 71

Страница: 71 / 99

Nuvo-3100 Series User’s Manual

Page 71 of 99

4.1.2 SATA Controller Mode for Nuvo-3100VTC

The SATA controller of Nuvo-3100VTC supports three operating modes: IDE, AHCI and

RAID mode. IDE mode configures SATA controller to access SATA interface in legacy IDE

mode, and is compatible with most storage devices. AHCI mode, which exposes SATA's

advanced capabilities such as hot swapping and native command queuing, is supported in

several later version of operating systems. RAID mode provides a more reliable data

storage (RAID 1/5/10) or a higher disk access throughput (RAID 0). Nuvo-3100VTC

features built-in hardware RAID. No additional H/W or driver is needed to use RAID

function.

Our suggestion of how to set SATA controller mode is

If you’re using Windows XP, Linux kernel earlier than 2.6.19, you should select

IDE mode.

If you’re using Windows Vista, Windows 7, Windows 8, or Linux kernel from 2.6.19

onward, you can select AHCI mode for better performance.

If you’re installing two 2.5” HDD/SSD and looking for data striping (RAID 0) or data

mirroring (RAID 1), you can select RAID mode to utilize built-in RAID.

To set SATA controller mode:

1. When Nuvo-3100VTC boots up, press F2 to enter BIOS setup utility.

2. Go to [Advanced]

[IDE Configuration].

3. Set the [HDC Configure as] to a proper mode for your Nuvo-3100VTC.

Содержание Nuvo-3100 Series






























































































Результаты поиска

Содержание Nuvo-3100 Series

Отзывы:

Neousys Technology Nuvo-3100 Series, Руководство пользователя, Страница: 71 / 99

Результаты поиска

Содержание Nuvo-3100 Series

Отзывы: