Neousys Technology Nuvo-3100 Series Скачать руководство пользователя страница 17

Страница: 17 / 99

Nuvo-3100 Series User’s Manual

Page 17 of 99

2.2.7 DVI/HDMI Connectors

Nuvo-3100 series supports triple independent display outputs via a DVI-I/HDMI connector

(front panel) and two DisplayPort connectors (back panel). The DVI-I connector on the front

panel offers DVI/HDMI and VGA display outputs. The DVI/HDMI output can be either DVI

signals or HDMI signal depending on the display device connected and support up to 1920

x 1080 resolution. The VGA output supports up to 2048x1536 resolution.

For VGA monitor, Neousys offers a dedicated DVI-to-VGA adapter as an accessory

shipped with Nuvo-3100 series. This adapter supports VGA DDC signals and thus

eliminates compatibility issues with VGA monitors. Or you can use a DVI-I to VGA+DVI-D

Y-cable to support two independent display outputs.

DVI-to-VGA Adapter

DVI-I to VGA+DVI-D Y-Cable

Due to the limitation of Intel® QM77/HM76 PCH, the feature of triple independent display

outputs is only available via the configuration of DVI+DispDisplayPort or

VGA+DispDisplayPort. You also need to install corresponding graphics driver for

Windows XP/7/8 to enable this feature. Please refer to section 4.4 for information regarding

driver installation.

Note

If you want to connect to a VGA monitor via DVI-I connector, please use the DVI-to-VGA adapter

shipped with Nuvo-3100 series. Some off-the-shelf DVI-to-VGA adapters may have incompatible

pin definition and cause compatibility issue with DVI-I output of Nuvo-3100 series.

Содержание Nuvo-3100 Series






























































































Результаты поиска

Содержание Nuvo-3100 Series

Отзывы:

Neousys Technology Nuvo-3100 Series, Руководство пользователя, Страница: 17 / 99

Результаты поиска

Содержание Nuvo-3100 Series

Отзывы: