Nuvo-2400
User’s Manual
Copyright © 2015 Neousys Technology Inc. All Right Reserved.
Page 41 of 81
4.3 Install an DDR3L SO-DIMM Module
Nuvo-2400 Series provides one 204-pin, SODIMM socket for installing 1.35V DDR3L
memory module. You can install/replace the memory modules according to the following
the steps.
NOTE
Installing incorrect memory module might damage the system or result in system failure. Please make
sure you're installing a 1.35V DDR3L SODIMM module.
1. Refer
to the section “
” to remove the side cover.
Find the
memory module socket as shown in
2. Tile the memory module and insert it to the socket. As it's firmly contacted with socket
connectors, press it down till the clamps of the socket snap into the latching position of
the memory module.
Figure 30: Install the memory module