Installation and Operational Instructions for
EAS
®
-dutytorque Type 404_._ _400
Sizes 2
– 9
(B.4.3.1.ATEX.EN)
06/10/2016 TK/GH/SU
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, D-87665 Mauerstetten, Germany
Tel.: +49 8341 804-0, Fax: +49 8341 804-421
Page 1 of 15
Please read these Operational Instructions carefully and follow them accordingly!
Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts.
These Installation and Operational Instructions (I + O) are part of the clutch delivery.
Please keep them handy and near to the clutch at all times.
The product must be specially marked for use in areas where there is a danger of explosion.
The product will only be marked if it is ordered especially for an Ex-area.
Contents
Page 1:
- Contents
Page 2:
- Safety and Guideline Signs
- Safety Regulations
Page 3:
- Clutch Illustrations
Page 4:
- Clutch Illustrations
- Parts List
Page 5:
- Table 1: Technical Data of the
EAS
®
-element Clutch
- Table 2: Technical Data of the
EAS
®
-element Clutch
Page 6:
- Table 3: Technical Data of the
Flexible Shaft Coupling
- Table 4: Screw Tightening Torques
Page 7:
- Design
- Scope of Delivery / State of Delivery
- Function
- General Installation Guidelines
Page 8:
- Clutch Installation
- Axial Installation
- Radial Installation
Page 9:
- Clutch De-installation
- Replacing the Flexible Intermediate Ring
- Checking the Motor Running Characteristics
Page 10:
- Torque Adjustment
- Re-engagement
Page 11:
- Permitted Shaft Misalignments
- Clutch Alignment
- Maintenance and Maintenance Intervals
- Disposal
Pages 12 to 13:
Guidelines and Directives for Operation in
Areas Where There is a Danger of Explosion (Dependent on
Type)
- Classification of Areas Where There is a Danger of Explosion and Permitted Types
- Conditions to Observe in Areas Where There is a Danger of Explosion
- Initial Operation
- Maintenance and Inspection Intervals for Clutches in Areas Where There is a Danger of Explosion
Page 14:
- Malfunctions / Breakdowns
Page 15:
- Declaration of Conformity
Attachment:
- Adjustment Diagram
- Assembly Drawing
- Tschan Operational Instructions BAWN 060-EX
