Neomatica ADM007, Руководство по эксплуатации

Страница: 9 / 26

OOO Neomatica. Terminal ADM007 GLONASS / GPS. Rev.1.3 dated 13.09.2019
9
the way to connect the device by clicking on the Bluetooth icon in the upper left corner of the
Configurator, as shown in Figure 4;
Figure 4 - ADM Configurator: choosing how to connect the device
4) to supply power to the tracker ADM007;
5) if there are several active trackers ADM007 within the reach of the Bluetooth adapter of the
personal computer, select the "Select device" flag and enter the last 4 digits of IMEI in
accordance with Figure 5. If there is only one active tracker ADM007 within the reach of the
Bluetooth adapter of the personal computer, you may remove the "Select device" flag. In this
case, a random tracker will be connected from all detected;
Figure 5 - ADM Configurator in device connection standby mode
6) after a few seconds the connection between the tracker and the ADMConfigurator program
will be installed and the settings window will be displayed;
7) after the device is set or, if connection of other tracker is required, click "disable device" in
the upper right corner of the ADMConfigurator program. The configurator will go into a
standby mode, as shown in Figure 6.