OOO Neomatica. Terminal ADM007 GLONASS / GPS. Rev.1.3 dated 13.09.2019
16
BMODE X
X=0 -
«Тracker» mode.
X=1 -
«Beacon» mode.
5.7
.1 “Tracker” operation mode
This mode is used to create (draw) exact path of travel.
The routes record is done using all possible criteria:
⎯
change of speed;
⎯
acceleration threshold exceeding;
⎯
distance passage;
⎯
direction change;
⎯
regarding the period of movement;
⎯
regarding the period of parking;
⎯
regarding alarm period;
⎯
at tracker start up;
⎯
change of discrete state at input;
⎯
change of device status
5.7.2
“Beacon” operation mode
This mode is used to record routes at a given time period and is not suitable for the creation of
exact path of travel. Time period of routes record equals to the period of routes record while parking.
The routes record is done only using the following criteria:
⎯
at tracker start up;
⎯
change of discrete state at input;
⎯
regarding the parking period;
⎯
regarding alarm period;
⎯
change of device status
6 Connection of additional equipment
The analog input IN0 (AIN0) can be used to connect analog type sensors and voltage level
measurement, and can also be interpreted as discrete.
Voltage measurement range: 0..58.8 V.
Discreteness (sensitivity): 57.4 mV.
Minimum input resistance: 200 kOhm.
Do not apply voltage exceeding the upper limit of the measuring range.
Содержание ADM007
Страница 1: ......
Страница 26: ...OOO Neomatica Terminal ADM007 GLONASS GPS Rev 1 3 dated 13 09 2019 26 in21 in22 in23 in24...