USE
STRONG trim PRO
5-2
NEOLT
For media with thickness from 2mm. up to max 4,5 mm.
Follow this procedure to cut media with thickness higher than 2mm until you reach a maximum of
4,5mm:
•
Position the media to cut on the feeding table and use the brackets
D
to block the media so it
doesn’t slide
3
.
•
Perform the cut moving the blade holder carriage from right to left or vice versa,
4
.
•
Remove the trimmed media from the insertion table and the cut part from the paper
collecting sheet.
•
To perform a new cut, repeat the operation described above
We strongly recommend not to place any object on the insertion table.
Characteristics of the media to be cut
5.1.3
This trimmer has been designed to cut only media having the basic weight indicated in
this manual, see
List of material - Chapter 3.3
We recommend to not attempt to cut material having features different from the specified
ones, as the machine could be seriously damaged.
4
3
D
Содержание STRONG trim pro 130
