Neolt STRONG trim pro 130, Руководство пользователя

Страница: 25 / 44

USE
STRONG trim PRO
5-1
NEOLT
Qualification of the operator 5.1
The machine must be used by qualified personnel only.
Workplace 5.1.1
Position of the operator: During start up and cutting, operator’s positing is in front of the
machine, with the control panel in the centre. In case of maintenance, his position
depends on the operation to be performed.
Insertion of the media to be cut 5.1.2
In case of media with 2mm thickness or lower.
To cut media 2mm thick or lower, you can use the trimmer in a standard way by following
this procedure:
•
Position the media to cut on the feeding table, and, through the millimetric scales on
the trimmer, measure the cut
1
, or line up the media to trim with the brackets
D
•
Cut the media, by moving the blade holder carriage from right to left or vice versa
2
.
•
Remove the trimmed section from the machine and the cut part from the collection
basket.
•
To perform another cut, follow the above-mentioned procedure.
2 1
D