Neolt STRONG trim pro 130, Руководство пользователя

Страница: 19 / 44

INSTALLATION
STRONG trim PRO
4-3
NEOLT
Assembling 4.3
•
Open the packaging box
1
containing all the components (Fig. 4.1 Transport conditions).
•
Remove polystyrene protections
2
(Fig. 4.1 Transport conditions).
For this operation, minimum 4 persons are required.
•
Install the support, assembling the lower traverse
3
and the upper one
4
with the
right and left posts, using the provided screws and bushing
5
.
Attention The shoulder has holes with a different diameter, the side with the bigger hole
must face outward.
•
To assemble the stand, screw on the bottom traverse
4
first to one shoulder, then to the
other with the screws and the bushes supplied
5
.
Attention When you assemble the upper traverse, the central push rod must face upwards
6
. The value set by Neolt is 3 mm.
4
3
5
6