Neolt STRONG trim pro 130, Руководство пользователя

Страница: 9 / 44

GENERAL INFORMATION
STRONG trim PRO
1-5
NEOLT
Description of the machine 1.10
Correct use of the machine 1.10.1
This machine can be used only to cut media having the allowed basic weight (max paper
thickness
4,5 mm ).
As the machine consists of assemblies physically separated and autonomous, the proper
use of the machine can be identified also in the operation of a single part.
Foreseen modes of use
The installation and the extraordinary maintenance of the machine must be carried out by
qualified personnel only.
The machine has been designed to be used in a site having the following features:
•
Protection against atmospheric agents.
•
Proper illumination.
•
Allowed range of temperature: from 18°C to 35°C.
•
Allowed humidity range: from 30 % to 80 %.
Incorrect use of the machine 1.10.2
Any use other than that indicated in Section
1.10.1 Correct use of the machine is to be
considered incorrect, especially:
•
Using the machine in ways which differ from those which it has been designed for,
represents an anomalous condition and could therefore damage the structure of the
machine.
•
Using the machine without its protections and without the safety equipment.
•
The non compliance with the procedures described in this manual, and specially those
concerning maintenance and repairing.
•
The use of the machine in a site where fire and explosion risks are present, as the
machine is not provided with explosion proof devices.
•
Its use in an explosive environment.
•
Its use in an inflammable environment.