NeoBiotech N10 Series, Руководство по эксплуатации

Страница: 11 / 20

Dry Bath N10 Series Operation manual Chapter 4 Operation Guide
—
6
—
Chapter 4 Operation Guide
1. Temperature and time setting
a) Press the On/Off button; the display flashes 3
times, the instrument goes into the initial
state with the sound of “beep”.
b) After about 3 seconds, the temperature
automatically goes up to the setting
temperature, the 28.5 in display is the
real-time temperature of the block (It
indicates the temperature now is 28.5°C). The
00:35 in display is the running time set
previously.(It indicates the running time is 35
min).
c) Press

or

in Temp to modify the
temperature.
d) Then press

or

at Time to modify the
time.
Wait 6 seconds to confirm the input temperature and time, and they flash
simultaneously and disappear, then the temperature automatically goes up to the
setting temperature.
2. Running/Stop
a) After the temperature and time setting
completed, the instrument automatically goes
up to the setting temperature, press
“Start”
key and immediately release, then the