NeoBiotech N10 Series, Руководство по эксплуатации

Страница: 4 / 20

3. The maintenance of instrument
The wells on the block should be regularly cleaned by soft clean cloth stained with
a little alcohol, to ensure the tubes fully contact with tubes, and has good thermal
conductivity without pollution.
If there are smutches on the instrument, clean them by soft cloth stained with
cleaning cream.
The Instrument should be put in the place of low temperature, little dust,
no water and no sun or strong lamp. What’s more, the place should be
good aeration, no corrosively gas or strong disturbing magnetic field, far
away from central heating, camp stove and other hot resource. Don't put
the Instrument in wet and dusty place. The vent on the Instrument is
designed for aeration. Don’t wall up or cover the vent in order to keep from
high temperature. If the user uses the more than one Instrument the same
time, the distance between them should be more than 100cm.
Power off when the user finishes the work. Pull off the connector plug
when there’s long time no use of the Instrument and cover it with a cloth or
plastic paper to prevent from dust.
Power off when cleaning the instrument.
When cleaning the well, don’t drop the cleaning liquid in the well.
Corrosive cleaning liquid is strongly prohibited.
Pull the connector plug from the jack at once in the following cases, and
contact the vendor:

There is some liquid flowing into the instrument;

Drenched or fire burned.

Abnormal operation: such as abnormal sound or smell.

Instrument dropping or outer shell damaged.

The function has obviously changed.