NeoBiotech N10 Series, Руководство по эксплуатации

Страница: 16 / 20

Dry Bath N10 Series Operation manual Chapter 4 Operation Guide
—
11
—
Notes: Pressing “Stop” and “  ” simultaneously during the temperature calibration
indicates exiting the temperature calibration Program. The changed value will
be of no effect.
4
．
Temperature control by external sensor
a) Insert the external sensor into a fixed well.
b)
Press “Stop” without release, then simultaneously press “  ” at Time for 3 seconds,
the external indicator light goes on to indicate that it has entered into the
temperature control mode of external sensor.
c)
Press “Run” for program running.
Tips: After entering into the external temperature control mode, the user can
simultaneously press
“Stop” and " 
" on Time to exit, while the external indicator
light goes off.
5
．
The exchange of metal block
a) Completely screw out the 2 screws which
were used for fixing metal blocks by
combination wrench in an anticlockwise
direction.
b) Fix the wrench in the center well of the block .
c) Pull out the wrench with the block.