Neo-Neon VariFlood Duo, Руководство пользователя

Страница: 11 / 20

ILDW-7090524-00D-31
11
Instruction:
1
. When the value of MAC is between 8 and 87, the channel 3, 4, 5, 7, 8, 9 is invalid. The operating value
is installed of red, green and blue. Other channel is valid.
2. When the value of MAC is between 0 and 7 and between 88 and 255, all channels are valid.
3. Method to restore the white balance color: Channel1= 4-6 or 88-255; Channel 2=255,Channel
6=255;Channel 10=0;Channel 11=255,Channel 12=0;Then adjust channel 3,4,5,7,9 and make the two
lamp upward and downward. Finally, set channel 2=220, channel 11=71 and channel 12=255 and keep it
for four seconds.
4.
Linking Mode
Firstly turn off the DMX controller then put one of the fixture in master mode and others in slave mode.
Details as below:
1>SLavID menu
Instruction
：
Steps
：
When the display shows HELLO, the dot flicks. Then press
UP/DOWM for a short second until the display switch to the main menu
SLAVID. Then press MODE for a short time. It will show submenu XX
（
01-39
），
flicking. Press UP/DOWN to change the ID of this product. After
selection, press MODE for a short time
，
the display will return to main
menu SLAVID.
Note
：
The setting of main menu SLAVID is valid under auto and
DMX mode. If you want to know more explicitly about it, you can read the
Fix menu setting.
1> Fixt. Menu Instruction:
Steps1: When the display shows HELLO, the display flicks. Then press
UP/DOWN for a short second.
Adjust to PGSET, and then press MODE for a little longer time until the display
shows PRog.
.
Steps2
：
Press UP/DOWM until the display shows Fixt. Then press MODE
for a short second
，
the display will show ALL, ODD, EVEN, MASTR or
SLV01-SLV29 and the display will flick. Select one of them and press MODE for
a short second to switch to menu Fixt. Then press MODE for a longer time until
the display shows PGSET.
Note
：
H E L L O
S L Av I D
X X ( 1 - 3 9 )
H E L L O
P G S E T
P R o g .
F i x t .