Neo-Neon VariFlood Duo, Руководство пользователя

Страница: 16 / 20

ILDW-7090524-00D-31
16
ⅵ．
Timing operation mode
：
Instruction
：
Step1
：
When the display shows HELLO, the dot flicks. Then press UP/DOWM for a short second.
And then switch to main menu and set it ON.
Step2
：
Press MODE for a short time and back to main menu. Then switch to main menu PGRUN
and set it OFF.
Step3
：
Press MODE for a short time and back to main menu. Then switch to main menu SCHED
and set it ON.
Step4
：
Press MODE for a short second and back to main menu. Then switch to main menu
SCHEDI and press MODE for a longer time until the display shows EVENT
（
1-36
）
.It can edit 36
pieces of time events for maximum. When the value is 1, edit event1 operating parameter.
Step5
：
Switch to submenu PROG.
（
1
，
2
，
3
）
, which indicate that the program event1 run, is
shown, totaling 3, three programs under auto mode. You choose program1 here.
Step6
：
Switch to submenu DAY to ensure which day this event runs. You can choose from Monday
to Sunday.
DAY=MON
：
indicates that this event can only run on Monday
；
DAY=TUE
：
indicates that this event can only run on Thursday
；
DAY=WED
：
indicates that this event can only run on Wednesday
；
DAY=THU
：
indicates that this event can only run on Thursday
；
DAY=FRI
：
indicates that this event can only run on Friday
；
DAY=SAT
：
indicates that this event can only run on Saturday
；
DAY=SUN
：
indicates that this event can only run on Sunday
；
DAY=ALL
：
indicates that this event can only run from Monday to Sunday.
Step7
：
Switch to submenu START to ensure when the event starts run. The time is set at 08
：
00.
Step8
：
Switch to submenu START to ensure when the event ends. The time is set at 23
：
00.
Step9
：
Switch to submenu ENABLE = ON, which represent that the time is valid.
Step10
：
When you repeat the steps 4 to steps 9, you can make other events run at scheduled time.
(Remark
：
Set SCRUN of main menu PGSET =ON)
ⅶ．
Temperature protection Mode
：
When the temperature of the fixture is higher than 50
℃ ，
the brightness will decrease
correspondingly. When the temperature of the fixture is higher than 80
℃
, the fixture will be off
automatically.
H E L L O M A S T R P G R U N S C H E D .
S C H E D I
E V E N T
P R O G.
D AY
S TA RT
E N D
E N A B L E