Neo-Neon VariFlood Duo, Руководство пользователя

Страница: 9 / 20

ILDW-7090524-00D-31
9
1. DMX/Linking Mode
：
2.1 DMX Operation Instruction
：
Step1
：
When the display shows HELLO, the dot flick. Then press UP to enter main menu A***.
Then press MODE for a short second when the three value, DMX address, after A flick. The three value
ranges from 1 to 512. Press UP or DOWN to change the DMX address.
Step2
：
After press MODE for a short second, the display does not flick. Then press UP or DOWN to
enter main menu MASTER when you press MODE for a short second. The display flicks and press UP
or DOWN until the display shows OFF, namely entering into DMX mode.
2.2
DMX Connector
：
DMX male connector:
PIN1 GND ground wire
PIN2 - COLD signal negative
PIN3 + HOT signal positive
2.3
DMX Link Chart
：
The distribution under the DMX control
Chann
el
Name
Value Function Description
0-3 off
4-6
on
1 Shutter/Strobe
7-59
strobe(20~1Hz)
H E L L O
A 0 0 1
M A S T R = O F F
In DMX Out
Fixture 1
DMX Controller
DMX out
In DMX Out
Fixture 2
In DMX Out
Fixture 3