Neo-Neon VariFlood Duo, Руководство пользователя

Страница: 14 / 20

ILDW-7090524-00D-31
14
Instruction
：
Step1
：
When the display of the main menu shows HELLLO, the dot flicks. Then press UP/DOWN
for a short second until the master is on.
Step2
：
Press MODE to switch to main menu and then switch to submenu PGRUN (OFF, 1 ,2, 3)
OFF means it does not work
，
1 represents that it operates in the first program. 2 represents that it
operates in the second program. 3 represents that it operates in the third program.
Step3
：
Press MODE for a short time and exit to main menu. Switch to PGSET, and then press
MODE for a longer time until the display shows PROG. The value of PROG ranges from 1 to 3. 1 stands
for the program which needs to be edited is program1. 2 stands for the program which needs to be
edited is program2. 3 stands for the program which needs to be edited is program3.Take the PROG=1
as example, every program can used to set 10 scenes the most, 1 the least each of which needs to set
18 parameters
。
Detailed as below:
Step4
：
Switch to submenu SCENE (1-10), at first you set 1.
Step5
：
Switch to submenu FIXT. = ALL
，（
about the FIXT has been introduced above
）
.
Step6
：
Switch to submenu SHUTT
（
0-255
）
. You set it to 80.You can set the below value
according to your own demand.
Shutt (0-255): detailed parameter as below
Shutt
（
0-3
）
: all leds are off
；
Shutt
（
4-6
）
: on
；
Shutt
（
7-59
）
: strobe (20~1Hz)
；
Shutt
（
60-69
）
: Visional Strobe on
：
Shutt
（
70-78
）
: Visional Strobe off
Shutt
（
79-87
）
: Randomly strobe (from fast to slow)
Shutt
（
88-255
）
: On
；
Step7
：
Switch to submenu DIM0.This value cannot be set 0. The value is 255(the total
brightness of the first lamp).
Step8
：
Switch to submenu R0.The value ranges from 0 to 255.It is used to adjust the red
brightness of the first fixture. The value is 0 here.
Step9
：
Switch to submenu G0.The value ranges from 0 to 255.It is used to adjust the green
brightness of the first fixture. The value is 255 here.
Step10
：
Switch to submenu B0.The value ranges from 0 to 255.It is used to adjust the blue
brightness of the first fixture. The value is 255 here.
Step11
：
Switch to submenu MAC, the value of which ranges from 0 to 255.When the value of
MAC is between 8 and 87, the setting value of the R0
，
G0
，
B0
，
R1
，
G1
，
B1 is valid. Otherwise it
is the value installed.
MAC
（
0-7
）
: When the value of MAC is 0-7 and 88-255, all channels are valid .
；
MAC
（
8-15
）
: Rainbow slow mode-5 seconds
MAC
（
16-23
）
: Rainbow medium speed mode-5 seconds
MAC
（
24-31
）
: Rainbow fast speed mode-5seconds