Nemtek FG7B, Руководство по установке

Страница: 14 / 19

14
FG7B CONTROLLER
Mapping
MAPPING NEMTEK IO CARDS TO ENERGIZER(S)
Inputs on a Nemtek IO card may be used to control a specific energizer or all i.e. global
energizers on a network. A text file, itoemap.txt, i.e. io card to energizer mapping file, is used to
map each IO card address to an energizer.
This file can be made in notepad and has to be uploaded to the FG7B with the procedure for
loading mapping files.
TABLE 3: How the itoemap.txt file is structured
Line
Number
Function Associated with the
line
Lines of itoe.txt
file
Explanation
1
The energizer address that IO
card#33 will communicate with
(unless global)
1 Energizer#1
2 Energizer specific inputs from this IO
card (note 3 and 5)
131
Input 1 from IO
card#33 will turn
On/Off Zone 1. Input
2 will turn On/Off
Zone 2 of energizer#1
(1+2+128)
3 Global Energizer inputs from this IO
card (note 3 and 5)
176
Input 5 from IO
card#33 will turn
On/Off all energizers.
Input 6 will turn all
energizer in HV/LV
mode (16+32+128)
4 Inputs that are valid on this IO card
(note 4)
51
Inputs 1,2,5 and 6
are used
(1+2+16+32)
5
The Energizer Address that IO
card#34 will communicate with
(unless global)
2 Energizer#2
6
The above sequence repeated etc.
etc.
Notes:
4) Table 4 has a number associated with each IO card input.
5) Select the appropriate numbers and add them for the inputs to be recognized. If the
number is set to 0 the all inputs are ignored.
6) This number must be added when using either a Selective energizer control or Global
energizer control in rows 2 and 3 of Table 3. I.e. if the total number is less than 128 for
a given row, then that particular row will be ignored.
7) Global inputs and specific inputs cannot be used on the same IO card so either line 2 or
line 3 should be zero.
Warning
1) If multiple IO Cards are used, with multiple identical global inputs enabled you could end
up with energizers turning On and Off every second. If the one global input dictates that
all energizers should be On and the other global input on another IO card dictates that
all energizers should be Off, you will have a non-functioning network.