Nemtek FG7B, Руководство по установке

Страница: 6 / 19

6
FG7B CONTROLLER: Hardware
LEDS
There are 8 LEDs on the green board.
LED9 – If flashing, indicates transmission of data from the control unit to TTL SERIAL/RS232/485
LED8 – If flashing, indicates that the control unit is receiving data from TTL SERIAL/RS232/485
LED7 – Not used in FG7-Druid
LED6 – Not used in FG7-Druid
LED5 – When on, indicates control board heartbeat
LED4 – When flashing, indicates that the watchdog timer is operational
LED3 – 5V supply indicator
LED2 – 3V3 supply indicator
The control unit hosts the software and gives outputs via the touch screen, HDMI, Ethernet or
USB port. All other ports should not be used by the installer.
USB PORT
The USB port is used for upgrading software, uploading site images, downloading logs and can
also be used for a mouse, so that a pointer can be used on the touch screen display.
HDMI PORT
The HDMI port is a standard micro-HDMI connector. To activate the HDMI port a shell script has
to be loaded (contact distributor for details) and the touchscreen ribbon cable has to be
disconnected from connector LCD1 (brown ribbon cable). A USB mouse should be used for
operating the system when using an HDMI display.
ETHERNET PORT
The Ethernet port is used for communication with a computer with Druid FenceProbe or third
party software.
Note:
The control unit hosts the software and gives outputs via the touch screen, HDMI, Ethernet or
USB port. All other ports should not be used by the installer.
TOUCHSCREEN
The touchscreen is the standard display used on the stand-alone units, without Druid FenceProbe
or third party software.