Nemtek FG7B, Руководство по установке

Страница: 3 / 19

3
FG7B CONTROLLER: Introduction
INTRODUCTION
The Nemtek FG7 platform is a platform used for providing a graphical interface and connectivity
to a network of Nemtek Energizers and Input/Output Cards (IO Cards).
The platform may be configured with different internal printed circuit boards, and software, to
provide the required functionality.
Warning:
Test the functionality of the system after configuration and before commissioning.
OPENING THE FG7B
On the opposite side to the LCD display are two screws that need to be removed.
With the LCD facing you, slide the LCD gently to one side by approximately 15mm.
Leverage the LCD out as shown in the picture.
A green printed circuit board IOT1601 JM and a dark blue control unit are inside the unit.