Nellcor OXIMAX N-600X Series, Руководство по обслуживанию

Страница: 173 / 210

Power Entry Module (PEM) Replacement
Service Manual
10030881 Rev. B 12-2008
173
Replacing the Power Entry Module
To replace the power entry module:
1. Reconnect the three power supply leads as indicated in
Removing the Power Entry
Module,
page 172.
2. Install the PEM in the bottom case with the fuse drawer facing down. A tab in the
bottom case holds the PEM in place.
3. Insert the bottom wing of the PEM between the tab and the internal edge of the
sidewall of the bottom case.
4. Push the PEM down and towards the outside of the oximeter until it clicks into
place.
5. Follow the steps in
Reassembling the Oximeter,
page 169.