Nellcor OXIMAX N-600X Series, Руководство по обслуживанию

Страница: 147 / 210

Prompts, Error Messages, and Error Codes
Service Manual
10030881 Rev. B 12-2008
147
54-128 Reserved for future front end object errors.
129-171 LPS Unexpected LPS error (LPS recovered from this error).
172-255 Reserved for future back end object errors.
256
%SpO
2
back end
%SpO
2
back end reports beginning of packet missing.
257 %SpO
2
back end reports packet start ID (SID) missing.
258 %SpO
2
back end reports packet length error.
259 %SpO
2
back end reports message length error.
260 %SpO
2
back end reports packet contains unsupported key.
261 %SpO
2
back end reports packet CRC error.
262 % back end reports end of packet missing.
263 %SpO
2
back end reports packet contains undefined key.
264 %SpO
2
back end reports corrupted variable.
265 %SpO
2
back end reports memory overflow.
266 %SpO
2
back end reports bad pointer.
267 %SpO
2
back end reports parameter value out-of-range.
268 %SpO
2
back end reports reset detected.
269 %SpO
2
back end reports unexpected value.
270 %SpO
2
back end reports time-out.
271 %SpO
2
back end reports not ready/not initialized.
272 %SpO
2
back end reports double fault.
273 %SpO
2
back end reports date out-of-range error.
274 %SpO
2
back end reports incompatible software version.
275 %SpO
2
back end reports incorrect registration number.
276
%SpO
2
back end
%SpO
2
back end reports sensor read failure.
277 %SpO
2
back end reports sensor signature verification fails.
278 %SpO
2
back end reports warmed sensor temperature set point failure.
279 %SpO
2
back end reports warmed sensor /%SpO
2
front end incompatible.
280 %SpO
2
back end reports does not support feature required by sensor.
281 %SpO
2
back end reports overflow/underflow.
282 %SpO
2
back end reports sensor activation failure.
283 %SpO
2
back end reports sensor write failure.
284 ECG trigger error.
Table 26.
Error Code Listing for Non-correctable Failures
Error Code Category Description