manualshive.com logo in svg

Nellcor OXIMAX N-560, Руководство оператора

Поделиться
Скачать
Nellcor OXIMAX N-560 Скачать руководство пользователя страница 71

Sensors and Accessories

N-560 Operator’s Manual

63

S e n s o r s   a n d   A c c e s s o r i e s

Selecting a Sensor

WARNING: Before use, carefully read the sensor directions for use, 
including all warnings, cautions, and instructions.

WARNING: Do not use a damaged sensor or pulse oximetry cable. 
Do not use a sensor with exposed optical components.

WARNING: Use only Nellcor sensors and pulse oximetry cables with 
the N-560. Other sensors or pulse oximetry cables may cause 
improper N-560 performance.

WARNING: Use only one pulse oximetry cable to increase the length 
of the sensor. Use of more than one pulse oximetry cable may have an 
adverse effect on performance. Do not attach any cable that is 
intended for computer use to the sensor port.

WARNING: Pulse oximetry readings and pulse signal can be affected 
by certain ambient environmental conditions, sensor application 
errors, and certain patient conditions.

WARNING: Tissue damage can be caused by incorrect application or 
duration of use of an SpO

2

 sensor. Inspect the sensor site as directed 

in the sensor directions for use.

WARNING: Do not immerse or wet the sensor.

Содержание OXIMAX N-560





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды