nedis IRON2000, Руководство пользователя

Страница: 4 / 40

4
a
Quick start guide
Steam Iron
IRON2000
For more information see the extended manual online:
ned.is/iron2000
Intended use
This product is a steam iron that can be used on a wide range of
fabrics.
The product is equipped with an anti-drip system that prevents
water from leaking out of the ironing plate when the product is cold.
This product is intended to remove creases and wrinkles out of
fabric.
This product is intended for indoor use only.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
The product is intended for use in household environments for
typical housekeeping functions that may also be used by non-expert
users for typical housekeeping functions, such as: shops, offices
other similar working environments, farm houses, by clients in
hotels, motels and other residential type environments and/or in
bed and breakfast type environments.
Main parts (image A )
1 Power cable
2 Burst button
3 Spray button
4 Steam selector
5 Water reservoir cover
6 Water reservoir
7 Spray nozzle
8 Ironing plate
9 Steam holes
q Handle
w Back cover
e LED indicator
r Thermostat dial
t Self-cleaning button
y Measuring cup
Safety instructions
- WARNING
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
• Only use the product as described in this document.
• Do not open the product, there are no user serviceable parts
inside.
• Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Keep the product out of reach for children under 8 years of age
when the product is switched on or cooling down.
• Do not leave the product unattended when connected to the
power source.
• Place the product on a stable, flat and heat resistant surface.
• Do not use the product when it is visibly damaged or when it is
leaking.
• Disconnect the product from the power source and allow the
product to cool down before filling the water reservoir.
• Do not open the water reservoir during use.
• Do not immerse the product in water or other liquids.
• Always check that the voltage of the product corresponds to the
mains voltage.
• Do not disconnect the product by pulling on the cable. Always
grasp the connector and pull.
• Do not pull the power cable to move the product.
• Do not pull the power cable over sharp edges.
• Do not use chemically descaled water to fill the product.
• Avoid contact of the ironing plate with metal objects. The ironing
plate can damage.
• Do not touch the ironing plate when using the product. The
ironing plate is hot.
• Do not direct steam towards people or other living objects. The
ejected steam is hot.
Before first use
Remove all packaging material, protective stickers and covers from
the product.
Fill the water reservoir (image B )
4
Use distilled water.
1. Fill the measuring cup A y with water.
2. Open the water reservoir cover A 5 .
3. Empty the measuring cup A y into the water reservoir A 6 .
4. Close the water reservoir cover A 5 .
Connecting the product
1. Place the product on the back cover A w .
2. Plug the power cable A 1 into a power outlet.
4
When the product heats up for the first time, the product may
emit some smoke. This is normal and does not affect the safety
of the product.
4
When the product heats up or cools down, the anti-drip system
may emit some clicking sounds.
Selecting the correct setting for your fabric
Do not iron items that contain this washing
symbol.
Icon on washing
label
Type of fabric Thermostat dial
Nylon
Silk
Wool
Cotton
Linen
Using dry ironing
1. Set the steam selector A 4 to the minimum position.
2. Set the thermostat dial A r to the correct setting for your fabric.
Wait until the LED indicator A e switches off to indicate the product
is heated up.
3. Start dry ironing your fabric.
4
The product automatically switches off after 8 minutes of
inactivity in vertical position or 30 seconds in horizontal position.
Using steam ironing
1. Set the thermostat dial A r to the second or third position.
Wait until the LED indicator A e switches off to indicate the product
is heated up.
2. Set the steam selector
A 4 to the desired steam output.
3. Start steam ironing your fabric.
4
Do not use steam ironing on synthetic fabric, nylon, or (synthetic)
silk. Steam ironing these fabrics can damage the fabric.
4
The product automatically switches off after 8 minutes of
inactivity in vertical position or 30 seconds in horizontal position.