NED SU2025GIG Скачать руководство пользователя страница 67

Страница: 67 / 73

NED

UME-0025-02 SU2025GIG

The capture software program is

custom made.

With the sample software program

provided

no image is captured.

The computer is set up correctly for the camera

(check the setup guide on the CD-ROM)

Nothing blocks off the light.

If a lens cap is attached, take it off.

The amount of illumination is

enough.

Check the light source. If the

images are too dark, try to increase

the light intensity, and vice versa.

No image at the full aperture.

The optical axes of the camera and

the image sensor are aligned.

If the provided software can capture

images, check whether the non-working

software is compatible with the camera.

Check whether the software included on

the CD-ROM can capture images.

The computer needs to be set up

correctly for the camera.

The camera may be out of order. Please

contact us for service.

The camera may be out of order. Please

contact us for service.

Yes

Содержание SU2025GIG










































































Результаты поиска

Содержание SU2025GIG

Отзывы:

Похожие инструкции для SU2025GIG

Бренды по названию

Популярные бренды

NED SU2025GIG, Руководство пользователя

Результаты поиска

Содержание SU2025GIG

Отзывы:

Похожие инструкции для SU2025GIG

Бренды по названию

Популярные бренды