NEC VERSA FX, Руководство пользователя

Страница: 96 / 174

6-2 Communicating with Your NEC Versa
PC Cards
Your NEC Versa FX system is equipped with two PC card slots that support both Type
II and Type III PC cards.
PC cards are all approximately the same size and vary only in thickness. All have a
standard 68-pin connector. Your NEC Versa supports the installation of the PC cards
described next.
Type II Cards
Type II cards have a thickness of 5.0 millimeters (mm). Type II cards are often storage
or communication devices such as Static Random Access Memory (SRAM), Read
Only Memory (ROM), Flash Memory, LAN, and Small Computer System Interface
(SCSI). Typically Type II cards include input/output (I/O) features such as modems.
Type II Extended Cards
Many PC cards are Type II extended cards. The extended card has an additional
physical component that protrudes beyond the traditional card size. The extension can
be as large as 40 mm deep by 9.65 mm high. This extension provides room for
additional electronics as well as a location for external connectors.
Type III Cards
Type III cards are thicker (10.5 mm) than Type II cards. Type III card uses include
advanced function I/O cards with additional features such as wireless modems,
multimode cards (cards with more than one function such as a combined LAN/modem
card), and small hard drive storage.
Communication Cards
You can use both fax/modem and network PC cards with your NEC Versa. Here are
some suggestions to help you get the best system performance.
Note
If you are using this unit outside of the United States or Canada, contact a
local NECC dealer for availability information.
!
Network Cards — You can use a network card with your system to gain access to a
local area network (LAN).
You can insert a network card in either slot.