NEC VERSA FX, Руководство пользователя

Страница: 69 / 174

Using the Operating System and Utilities 4-5
Using the NEC Customize Utility
Follow these steps to use the NEC Customize Utility.
1. Double click the NEC Customize icon.
2. From the display window, select the desired option.
3. Click Launch to initiate the selected option.
4. Follow the on-screen instructions to process the selected option.
For some of the selected options you are prompted to reboot your system.
5.
If necessary, click Exit to close the NEC Customize dialog box.
HDPREPEZ Utility
The HDPREPEZ utility automatically configures your NEC Versa’s system’s save-to-
file (STF) area on the hard disk drive.
Note
For more details about the HDPREPEZ utility, see the HDPREPEZ.TXT file in
the NECUTILS/HDPREP directory.
Using the HDPREPEZ Utility
In Windows 98, run the HDPREPEZ utility if you increase the memory capacity in
your NEC Versa beyond the factory installed base memory.
Follow these steps to run the HDPREPEZ utility.
1. Go to Start, Shut Down, Restart the computer in MS-DOS mode.
2. At the c: prompt, type LOCK C: and press Enter .
A message displays asking you to confirm your command.
3.
Press the indicated key to confirm your command.
4.
At the c: prompt, type
cd \necutils\hdprep
and press
Enter
to change to the
\necutils\hdprep directory.
5. Type HDPREPEZ and press Enter . The utility automatically prepares your NEC
Versa for the newly installed memory.
6.
Power off your system and then power on. A file, large enough to accommodate
your system’s memory is created on the hard disk drive.