NEC UX5000 Скачать руководство пользователя страница 194

Страница: 194 / 220

UX5000 IP Data Maintenance

6 - 50

Data Maintenance Tool

Tool-Related

Message

Is it not corresponded in the specified terminal.

Explanation

The model of the specified terminal does not support the
executed function.

Response

Executable functions depend on a terminal model. For details,
refer to the manual.

Message

This voice file cannot be optimized.

Explanation

An attempt to convert the voice file format has failed.

Response

The specified voice file may have been corrupted.

Message

This voice file was not downloadable.

Explanation

An attempt to read the specified voice file has failed.

Response

The specified voice file may have been corrupted.

Message

This voice file was not downloadable.

Explanation

An attempt to read the specified picture file has failed.

Response

The specified voice file may have been corrupted.

Message

Tool Manager starting error. This tool is not able to run more than
one.

Explanation

An attempt was made to start Tool manager several times.

Response

Check if Tool Manager is already open.

Message

The application illegally started. Please start from a Tool
Manager.

Explanation

The tool was started illegally.

Response

Start the tool from Tool Manager.

Message

Tool starting error.

Explanation

An attempt to start each tool has failed.

Response

The Data Maintenance Tool may have been destroyed. Repair or
reinstall the application.

Содержание UX5000





























































































































































































































Результаты поиска

Содержание UX5000

Отзывы:

Похожие инструкции для UX5000

Бренды по названию

Популярные бренды

NEC UX5000, Руководство по ресурсам

Результаты поиска

Содержание UX5000

Отзывы:

Похожие инструкции для UX5000

Бренды по названию

Популярные бренды