NEC Univerge SV8100 VM8000 InMail, Системное руководство

Страница: 311 / 388

VM8000 Issue 1.0
InMail System Guide 3 - 25
Options
0 (Erase)
After the subscriber listens to the entire new message and hangs up,
In-Mail erases the message.
1 (Save)
After the subscriber listens to the entire new message and hangs up,
In-Mail saves the message.
Default
1 (Save) (see above).
47-02-07 Recording Conversation Beep (Rec Conv Beep)
Use this option to enable or disable the Conversation Record beep. If
enabled, all parties on a call will hear the voice prompt Recording followed
by a single beep when the extension user initiates Conversation Record. If
disabled, the voice prompt and beep will not occur. When you disable the
Conversation Record beep, the following voice prompts do not occur while
VM8000 InMail records the conversation:
H
“Recording” (followed by a beep)
H
“That mailbox is full” (if the mailbox message storage capacity is reached)
H
“You have reached the recording limit” (if the recorded message is too long)
The SV8100 telephone system software provides an additional
Conversation Record beep. This beep repeats according to the setting of
Program 45-01-06 Voice Mail Integration Options: Record Alert Tone
Interval Time (0~64800 seconds). To disable the SV8100 telephone system
Conversation Record beep, enter 0 for this option.
See Live Record on page 2-139 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
1 (Yes - enabled)
47-02-08 Message Waiting Lamp (Update MW Lamp)
Use this option to enable or disable Message Waiting lamp at the extension
associated with the Subscriber mailbox. For Subscriber Mailboxes, leave
this option enabled. For Guest Mailboxes, leave this option disabled.
See Guest Mailbox on page 2-123 for more.
Disabling this option also disables Message Notification. See Message
Notification on page 2-173 for more.
See Message Waiting Lamp on page 2-189 for more.
See Subscriber Mailbox on page 2-227 for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
1 (Yes - enabled)