NEC Univerge SV8100 VM8000 InMail, Системное руководство

Страница: 153 / 388

VM8000 Issue 1.0
InMail System Guide 2 - 125
Programming
1. Set up a virtual extension for the Guest Mailbox.
11-04-01 Virtual Extension Numbering
Assign an unused extension number to an available virtual station port.
For example, assign extension 400 to virtual station port 1.
2. Activate an unused mailbox for the virtual extension.
47-02-01 Mailbox Active (Mailbox Active)
Enter 1 to activate a mailbox for the virtual station port.
Choose a mailbox that is not likely required for an installed extension (e.g.,
128).
By default, only mailboxes 1~8 are active.
3. Assign a mailbox number to the mailbox you activated for the virtual extension.
47-02-02 Mailbox Number (Mailbox Number)
The mailbox number you choose should be the same as the virtual
extension number (e.g., 400).
By default, mailboxes 1~8 are assigned to extensions 101~108.
4. Refer to Subscriber Mailbox on page 2-227 for additional details on Guest
Mailbox setup and operation.
Operation
Logging On to a Guest Mailbox
To log on to a Guest Mailbox:
1. Press the Speaker key + Dial the VM8000 InMail master number (e.g., 200).
2. When VM8000 InMail answers, dial the Guest Mailbox number.
Logging On to a Guest Mailbox from the Automated Attendant
To log on to a Guest Mailbox from the Automated Attendant:
1. After the Automated Attendant answers, dial # + The Guest Mailbox number.
o
This capability may be disabled in the Automated Attendant.
o
Your automated attendant may have GOTO or LOGON actions assigned to the Guest
Mailbox. Check with your Communications Manager.