NEC SVP SERVER -, Инструкция по установке и настройке

Страница: 50 / 56

7-4 Troubleshooting via System Status Menu
SVP Server Installation, Setup, & Maintenance Manual - Revision 1
Table 7-2 Network Status window Troubleshooting Information
Information Provided Descriptions
Ethernet Address
MAC address of the SVP Server
(hexadecimal).
System Uptime
The number of days, hours and minutes since the
SVP Server was last reset.
Net
The type of connection to the Ethernet switch
currently utilized. Refer to “SVP Server Capacity”
on page 2-3 for more information.
Note:
Data is transmitted over components by
proprietary technology. The Radio Priority
(RP) packets and bytes can be differentiated
from other types of transmissions and are
used to evaluate system functioning by
National Technical Assistance Center
(NTAC) and engineering personnel.
RX
Ethernet statistics concerning the received signal
during System Uptime. Statistics included are:
• bytes: bytes received.
• packets: packets received.
• errors: sum of all receive errors (long packet,
short packet, CRC, overrun, alignment).
• drop: packets dropped due to insufficient
memory.
• fifo: overrun occurred during reception.
• alignment: non-octet-aligned packets (number
of bits NOT divisible by 8).
• multicast: packets received with a broadcast or
multicast destination address.
TX
Ethernet statistics concerning the transmitted
signal during System Uptime. Statistics included
are:
• bytes: bytes transmitted.
• packets: packets transmitted.
• errors: sum of all transmit errors (heartbeat, late
collision, repeated collision, underrun, carrier).
• drop: packets dropped due to insufficient
memory.
• fifo: underrun occurred during transmission.
• carrier: carrier lost during transmission.
• collisions: packets deferred (delayed) due to
collision.
SVP-II Access Points in Use
Access points in use by Wireless Telephones,
either in standby or in a call 'Last' is current, 'Max'
is the maximum number in use at one time.
SVP-II Access Points in Calls Access points with Wireless Telephones in a call.
SVP-II Telephones in Use Wireless Telephones in standby or in a call.