NEC READY ES PRO, Инструкция по обслуживанию и справочник

Страница: 70 / 76

Locate the Password Clear jumper (J9C1-A) on the system board (see Figure C-1).
If required, remove any installed expansion boards to access the jumper (see Section 3, "Expansion Board
Removal").
Move the jumper to the Password Clear pins (pins 2-3).
Replace the system cover (see Section 3 "Replacing the Cover").
Connect system power and monitor power cables.
Power on the monitor and system. The system lets you boot your computer.
Power off and unplug the system and monitor.
Remove the system cover.
Move the jumper to the Password Enabled jumper pins (pins 1-2).
Replace any removed expansion boards (see Section 3, "Expansion Board Installation").
Replace the system cover (see Section 3, "Replacing the Cover").
Connect the system and monitor power cables and any external options.
Power on the monitor and system.
Run Setup to set a new password (see Section 2, "Security Menu").
BIOS Update Utility
The system BIOS resides on a flash ROM in the system. The flash ROM can be updated, should it ever
become necessary. This feature allows the ROM BIOS chip to be flashed with a new BIOS code through
software, rather than replacing the chip.
Performing an update is done with a BIOS Update utility file. The file can be downloaded from the NECCSD
Bulletin Board System (BBS).
Use the following procedure to access the BBS for the latest version of the BIOS Update utility. How to flash
the BIOS with the utility is described after the BBS access procedure.
NECCSD Bulletin Board System
See Section 4 for the procedure for logging onto the BBS. Have an unformatted diskette ready to use for the
download.
Using the BIOS Update Utility