Depending on product upgrade availability, your system memory can be upgraded to a total of 256 MB. When
upgrading your system memory, note the following conditions:
Be sure to use 168-pin 3.3V DIMMs with gold-plated contacts.
Bus speed of 66 MHz only is supported.
Non-Error Correcting and Checking (64-bit) and ECC (72-bit) DIMMs are both supported. When ECC memory
is installed, the BIOS automatically detects its presence and offers the Setup option to enable ECC mode.
NOTE: Although memory size and type may vary, the SDRAM DIMMs must meet the Intel 4-clock, 66-MHz,
unbuffered SDRAM DIMM specification for either 64-bit or 72-bit SDRAM.
Use the following procedure to:
check the memory installed in the system
determine the DIMM configuration needed to increase memory
identify DIMM sockets.
NOTE: If any cables block access to the DIMM sockets, label and disconnect them. If any boards block
access to the sockets, remove them.
Locate the two DIMM sockets, J5F2 – Bank 0 and J5G1 – Bank 1. See Appendix B to identify the sockets.
Use the following table to determine the DIMM configuration needed to upgrade memory.
Table -1 Optional Memory Configurations
Bank 0
Bank 1
Total RAM
1 M x 64 (8 MB)
Empty (0 MB)
8 MB (min. memory)
Empty (0 MB)
1 M x 64 (8 MB)
8 MB (min. memory)
1 M x 64 (8 MB)
1 M x 64 (8 MB)
16 MB
4 M x 64 (32 MB)
Empty (0 MB)
32 MB
2 M x 64 (16 MB)
2 M x 64 (16 MB)
32 MB
2 M x 64 (16 MB)
4 M x 64 (32 MB)
48 MB
4 M x 64 (32 MB)
4 M x 64 (32 MB)
64 MB
8 M x 64 (64 MB)
1 M x 64 (8 MB)
72 MB
2 M x 64 (16 MB)
8 M x 64 (64 MB)
80 MB
4 M x 64 (32 MB)
8 M x 64 (64 MB)
96 MB
2 M x 64 (16 MB)
16 M x 64 (128 MB)
144 MB
16 M x 64 (128 MB)
2 M x 64 (16 MB)
144 MB
16 M x 64 (128 MB)
4 M x 64 (32 MB)
160 MB
16 M x 64 (128 MB)
8 M x 64 (64 MB)
192 MB
16 M x 64 (128 MB)
16 M x 64 (128 MB)
256 MB
Содержание READY ES PRO
Страница 17: ......
Страница 34: ...Turn on the serial device and the computer Figure 31 Connecting an RS 232C Cable...
Страница 59: ...Figure 5 15 Illustrated Parts Breakdown 980428mc...
Страница 66: ......
