29
2. Projecting an Image (Basic Operation)
2-6. Turning off the Projector
1. Press the
(POWER) button on the projector cabinet or
the POWER STANDBY button on the remote control.
The [POWER OFF] message will appear.
2. Press the
(POWER) button again.
The light source will be turned off and the power supply will
be cut. The projector will go to standby mode and the POWER
indicator will light in green.
• If using the remote control, press the POWER STANDBY
button again.
• If you do not want to turn the power off, press the EXIT but-
ton.
3. Make sure the projector is in STANDBY MODE, then turn
off the main power switch “
○
(OFF)”
The
POWER indicator will go off and the main power will turn
off.
• While the POWER indicator is blinking blue in short cycles,
the power cannot be turned off.
Power On
Steady blue light
Standby
Steady green light
CAUTION:
Parts of the projector may temporarily overheat if the projector is turned off with the main power switch or the AC
power supply is disconnected while the projector is in operation or the cooling fan is running. Handle with care.
NOTE:
• Do not unplug the power cord from the projector or from the power outlet while an image is being projected. Doing so could
deteriorate the projector’s AC IN terminal or the power plug’s contact. To turn off the AC power supply when the projector is
powered on, use the projector’s main power switch, a power strip equipped with a switch, or a breaker.
• Do not turn off the main power switch or disconnect the AC power supply within 10 seconds of making adjustments or setting
changes and closing the menu. Doing so can cause loss of adjustments and settings.
