NEC POWERMATE ENTERPRISE - 09-1997, Руководство пользователя

Страница: 112 / 284

4-32 Using Tools and Utilities
To take advantage of these features, DMI has expanded its
interface in the following areas:
„
Interrupts may be enabled or disabled.
„
High and low limits can be set and are displayed for
temperature and power supply voltages.
„
Current readings are displayed for temperature, power
supply voltages, and chassis state.
„
Interrupts can be detected when “out of range”
conditions occur. User prompts are displayed to alert the
user to a potentially harmful condition.
Using the Chassis Intrusion Notification Feature
LANDesk Client Manager allows you to monitor your
system against chassis intrusion. Whenever the chassis is
opened, LANDesk Client Manager logs the intrusion and
reports the incident in a screen message the next time the
system is booted. The message appears in a LANDesk
Client Manager Notification window. This window appears
every time the system is rebooted until the report is cleared.
Close the notification window to remove the message from
the screen. Clear the message to prevent it from appearing
again the next time the system is rebooted.
To clear the message, follow these steps.
1.
Access LANDesk Client Manager.
„
If the LANDesk Client Manager Notification window
is still open, click
Yes , and then click the Client
Manager button.
„
From the desktop click
Start
on the taskbar, point to
Programs, point to
LANDesk Client Manager
, and
click LANDesk Client Manager 3.0 .
LANDesk Client Manager launches.