NEC P/N 0893416, Руководство пользователя

Страница: 33 / 36

Chapter 5
Calling Into A Conference Bridge Call
Aspire Conference Bridge User Guide
◆
29
Chapter 5
Calling Into A Conference Bridge Call
Calling Into A Conference Bridge Call
The installer programs the telephone ports used by the Conference Bridge into a Department Group. The pilot
number for this Department Group is entered into the EMail Con
Þ guration (page 17) so that when the EMail
noti Þ cation is used, the recipients know what telephone number to call.
Consult the System Administrator for the Department Group number used for the
Conference Bridge ports.
1. At the scheduled time for the Conference call, dial the Department Group number.
Example: Internal call: 650 (as de Þ ned in Program 11-07-01),
External call: 203-926-54xx (this telephone number is the DID/DIL trunk number that would
be directed to the Department Group pilot number).
2. After the announcement message plays, if required by the Conference Bridge setup, you hear a prompt
to enter your password. Enter the password provided when the conference was scheduled (refer to the
EMail notification or the Conference Manager) followed by the #.
Each password allows only one person to enter the conference call. Once a password is
used to sign into a conference, anyone else trying to use that same password to access the con-
ference call will hear an “invalid password” error message.
3. If required by the Conference Bridge setup, speak your name, then press the # key.
This voice clip will be used to announce your entry into the conference call.
4. You will now hear a message advising you that you are entering the conference call.
While in the conference call, there are several options available to the organizer as well
as each participant. Refer to the following table for details.
5. When the conference call is complete, each user simply hangs up.