English-18
ECO
Information
CARBON SAVINGS:
Displays the estimated carbon savings information in kg.
CARBON USAGE:
Displays the estimated carbon usages information in kg.
This is the arithmetic estimation, not actual measurement value.
This estimation is based without any options.
COST SAVINGS:
Displays the electricity cost savings in balance.
CARBON CONVERT SETTING:
Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting
is based on the OECD (2008 Edition).
CURRENCY SETTING:
Displays electricity pricing in 6 currency units.
CURRENCY CONVERT SETTING:
Displays electricity savings in kW/hour (US Currency is default).
NOTE:
This model’s initial setting is “Currency = US$” and its Currency Convert setting = $0.11.
This setting can be changed by using the ECO information menu.
If you want to use the French setting, please refer to steps below:
1. Open menu by pressing the Menu button and select the ECO information menu using the “LEFT” or
“RIGHT”
button.
2. Select CURRENCY SETTING item pressing the “UP” or “DOWN” button.
3. The French currency unit is Euro ( ). You can adjust currency setting to Euro icon ( ) from US dollar ($)
using the “LEFT” or “RIGHT” button in Current setting item.
4. Select CURRENCY CONVERT SETTING item using the “UP” or “DOWN” button.
This initial Euro ( ) setting is Germany of OECD (2007 Edition).
Please check receipt of French’s electricity prices or OECD data for French.
French of OECD (2007 Edition) was 0.12.
5. Adjust CURRENCY CONVERT SETTING item using the “LEFT” or “RIGHT” button.
Information
Provides information about the current resolution display (Main picture), current USB input setting and technical data
including the preset timing being used and the horizontal and vertical frequencies. Indicates the model and serial
numbers of your monitor.
OSD Warning
OSD Warning menus disappear with EXIT button.
NO SIGNAL:
This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned on or
when there is a change of input signal, the
No Signal
window will appear. You can access 3 OSD menus, OFF MODE
(see page 16), DIGITAL LONG CABLE (see page 22) and HDMI/DVI SELECT (see page 25).
RESOLUTION NOTIFIER:
This function warms if resolution other than the optimized resolution is used. After power is
turned on or when there is a change of input signal or the video signal doesn’t have proper resolution, the
Resolution
Notifi er
window will open. This function can be disabled in the MENU Tools.
OUT OF RANGE:
This function gives a recommendation of the optimized resolution and refresh rate. After the power
is turned on or there is a change of input signal or if the video signal doesn’t have proper timing, the
Out Of Range
menu will appear.
If you need detailed information about the controls, please use the ADVANCED OSD menu.
Содержание MD322C8
Страница 1: ...MD322C8 User s Manual ...
