NEC MD322C8, Руководство пользователя

Страница: 28 / 38

English-26
DDC/CI DDC/CI ENABLE/DISABLE: Turns on or off the two way communication and control with
connected PC by video cable.
NOTE: Set DDC/CI to ENABLE when using hardware calibration software over
DisplayPort, DVI or HDMI.
SCREEN SAVER Use the SCREEN SAVER to reduce the risk of image persistence.
MOTION (Default OFF): Screen image moves periodically in 4 directions in order to
reduce the risk of image retention.
Timing for MOTION can be set so the screen image moves in intervals from every
10 to 900 seconds. Timing is set in 10-second increments.
OPTION (Default REDUCED): There are two optional selections.
REDUCED: Screen image is reduced to 95% size and is moved periodically in
4 directions. Screen may appear slightly less sharp than normal. The full image appears
on the display.
NOTE: Some input signals may not be supported by REDUCED.
FULL: Screen image is set to FULL and is moved periodically in 4 directions. Screen
image goes outside of the display area in the direction that it shifts so that a portion of the
image may appear to be cut off.
NOTE: SCREEN SAVER works when MULTI PICTURE is OFF.
TagB CARBON SAVINGS Displays the estimated carbon savings information in kg.
CARBON USAGE Displays the estimated carbon usages information in kg. This is the arithmetic estimation,
not actual measurement value. This estimation is based without any options.
COST SAVINGS Displays the electricity cost savings in balance.
CARBON CONVERT
SETTING Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is
based on the OECD (2008 Edition).
CURRENCY
SETTING*
1
Displays electricity pricing (available in 6 currency units).
CURRENCY
CONVERT SETTING Adjusts electricity prices-electric energy equivalent in the electrical rate saving
calculation.
HOURS RUNNING*
1
Show total running time.
SELF COLOR
CORRECTION Uses the internal backlight color sensor to compensate for a natural color shift that
occurs with age.
STAND-ALONE
CALIBRATION Compensates for a typical LCD yellowish color shift due to long-term usage by
optional USB color sensor. See page 32. When you use this function, SELF COLOR
CORRECTION is not necessary.
TagC INFORMATION*
1
Provides information about the current display resolution. Technical data, including the
preset timing currently being used and the horizontal and vertical frequencies is also
displayed.
* 1 This item does not reset by FACTORY PRESET (Tag7).