NEC LAVIE PM9560, Руководство пользователя

Страница: 8 / 16

8
Left side, back
4 Power lamp
(
)
Lamp that lights up when the power is turned ON.
* If you continue to use the computer with only battery power
while the battery level is low, the computer automatically go into
sleep mode.
Power Lamp
Status When the AC adapter
is connected When the AC adapter
is disconnected
Lights in blue The power is ON
Blue flashing Sleep state
Lit orange –
The power is ON and
the battery is low
Blinking
orange
–
one of the following
• The power is ON and
the battery is low
• In sleep mode,
battery level is low
Off Power is off or the computer is in sleep mode*
Notes on using USB compatible devices
• When connecting or disconnecting a USB compatible device, wait at
least 3 seconds.
• If the USB device is not recognized properly, unplug it from the USB
connector and plug it in again.
• Do not plug in or unplug the USB compatible device during the power
saving state, during transition to the power saving state, or during
recovery. Also, do not operate the connected USB compatible device
during the transition to the power saving mode.
• The maximum power supply capacity per USB connector is as follows.
- When the computer is turned on:
USB3.1 Type-C connector, USB3.0 Type-C connector: 1.5A USB3.1
connector: 0.9A
- When in sleep mode:
A few tens of mA about
1 Headphone /
headphone
microphone
terminal ( )
A terminal for connecting headphones or a headphone
microphone(4-pole mini plug) for smartphones. A terminal for
connecting external speakers and audio equipment to output and
input audio signals.
2 microSD
memory card
slot (
)
Slot for installing "microSD memory card", "microSDHC memory
card", "microSDXC memory card". Insert the memory card with
the front side facing up.
3 Battery
charging lamp Lamp that lights up when the battery is charging.
When the battery charging lamp is charging, the battery level may
be displayed as 100% in Windows, but this is due to an error
when displaying the battery level in Windows and is not a
malfunction. Also, check the charging lamp for completion of
battery charging.
1
2
3
*1: Results in an error when the battery is charging, or error when
the battery life is dead or deteriorates.
*2: If the battery is already fully charged or almost fully charged,
the lamp may not light up and further charging may not be
possible.
Battery charge
lamp status Battery charge status
Solid orange Battery charging
Flashing orange Battery error
*1
Off The AC adapter is not connected or
charging is complete
*2