1. Installing Internal Optional Devices
Express5800/R120g-2E User's Guide
56
Chapter 2 Preparations
Note
The heat sink must be mounted in the predefined direction. Make sure the direction
of heat sink before mounting it.
The label indicating the mounting orientation of the CPU#2 heat sink is affixed to the
side surface of the heat sink.
12. Make sure that the heat sink is installed on a level with the motherboard.
Note
•
If the heat sink is not level, remove it, and then install it again.
The following probably causes the heat sink not to be level:
–
The CPU is not positioned correctly.
–
Some screws are not completely tightened.
•
Do not move the secured heat sink.
13. Continue to install or remove internal optional devices, mount and connect the server, and then turn it on.
14. Run BIOS Setup Utility (SETUP) to confirm the following settings. See
Chapter 3
(
2. BIOS Setup Utility
(SETUP)
).
Advanced
→
Processor Configuration
→
Processor Information
[CPU ID]
[L2 Cache RAM]
[L3 Cache RAM]
FRONT
REAR
