6. Windows System Recovery
Express5800/R120f-2E, T120f Maintenance Guide
45
Chapter 1 Maintenance
6.
Windows System Recovery
Recover the Windows system by using the following instructions if the system does not work normally.
Note
•
Install each driver and Starter Pack after recovering Windows.
See "Installation Guide (Windows)" to install Starter Pack and drivers.
•
If hard disk drives cannot be found by Windows, you cannot recover
Windows.
6.1
Recovery of Windows Server 2012 R2 and Windows Server 2012
If Windows does not start normally, you can recover it by using the feature of the Windows installation disc. To
run this feature, start the installation disc, and then choose
Repair your computer
in
Windows
Setup
wizard
.
We recommend that this option is performed by the system administrator.
To install the OEM drivers, copy the files under the following folder in EXPRESSBUILDER to removable
media.
For the onboard RAID controller (LSI Embedded MegaRAID):
•
Windows Server 2012 R2
:
\010\win\winnt\oemfd\ws2012r2\megasr1
•
Windows Server 2012
:
\010\win\winnt\oemfd\ws2012\megasr1
6.2
Recovery of Windows Server 2008 R2 and Windows Server 2008
If Windows does not start normally, you can recover it by using the system recovery option.
We recommend that this option is performed by the system administrator. For details, refer to Windows Help.
To install the OEM drivers, copy the files under the following folder in EXPRESSBUILDER to removable
media.
For N8103-176/177/178 RAID Controller:
•
Windows Server 2008 R2
:
\010\win\winnt\oemfd\ws2008r2\megasas2
•
Windows Server 2008 32-bit Edition
:
\010\win\winnt\oemfd\ws2008\megasas2
For the onboard RAID controller (LSI Embedded MegaRAID):
•
Windows Server 2008 R2
:
\010\win\winnt\oemfd\ws2008r2\megasr1
•
Windows Server 2008 32-bit Edition
:
\010\win\winnt\oemfd\ws2008\megasr1
