1. POST Error Message
Express5800/R120f-2E, T120f Maintenance Guide
188
Chapter 3 Appendix
Error Message
Cause
Solution
9040
PEI_CPU_SELF_TEST_FAILED
An error was detected in CPU
initialization.
Contact your sales representative.
9041
Detected CPU Error on CPU #1
An error was detected on CPU
#1.
9042
Detected CPU Error on CPU #2
An error was detected on CPU
#2.
9060
PEI_CPU_MISMATCH
CPU #1 and #2 are not the
same type.
9080
Link in Slow Speed Made
between CPU1 and CPU2.
Low-speed mode was detected
on bus between CPU1 and
CPU2.
9081
Link Failure between CPU1
and CPU2
Connection failure was detected
on bus between CPU1 and
CPU2.
9082
Link width Error between
CPU1 and CPU2
Connection decline was detected
on bus width between CPU1 and
CPU2.
9E80
Forced to use CPU with
error.
An error was detected in CPU,
but the CPU was forcedly
enabled.
A001
Memory Error detected in
CPU1_DIMM1
An error was detected in
CPU1_DIMM1.
A002
Memory Error detected in
CPU1_DIMM2
An error was detected in
CPU1_DIMM2.
A003
Memory Error detected in
CPU1_DIMM3
An error was detected in
CPU1_DIMM3.
A004
Memory Error detected in
CPU1_DIMM4
An error was detected in
CPU1_DIMM4.
A005
Memory Error detected in
CPU1_DIMM5
An error was detected in
CPU1_DIMM5.
A006
Memory Error detected in
CPU1_DIMM6
An error was detected in
CPU1_DIMM6.
A007
Memory Error detected in
CPU1_DIMM7
An error was detected in
CPU1_DIMM7.
A008
Memory Error detected in
CPU1_DIMM8
An error was detected in
CPU1_DIMM8.
A00D
Memory Error detected in
CPU2_DIMM1
An error was detected in
CPU2_DIMM1.
A00E
Memory Error detected in
CPU2_DIMM2
An error was detected in
CPU2_DIMM2.
A00F
Memory Error detected in
CPU2_DIMM3
An error was detected in
CPU2_DIMM3.
A010
Memory Error detected in
CPU2_DIMM4
An error was detected in
CPU2_DIMM4.
A011
Memory Error detected in
CPU2_DIMM5
An error was detected in
CPU2_DIMM5.
A012
Memory Error detected in
CPU2_DIMM6
An error was detected in
CPU2_DIMM6.
A013
Memory Error detected in
CPU2_DIMM7
An error was detected in
CPU2_DIMM7.
A014
Memory Error detected in
CPU2_DIMM8
An error was detected in
CPU2_DIMM8.
A420
Online Spare Memory was not
ready.
Memory Sparing feature is
disabled in this memory
configuration.
Confirm the setting for
Memory RAS Mode
in
SETUP. If Memory Sparing, Memory Mirroring, or
Memory LockStep feature is enabled and DIMM
is degraded, this POST error is displayed.
Run SETUP, change parameter for
Memory
Retest
to
Yes
, and then execute
Save Changes
and Exit
.
If the same error persists, contact your sales
representative.
A421
Mirroring Memory was not
ready.
Memory Mirroring feature is
disabled in this memory
configuration.
A423
Lockstep was not ready.
Memory LockStep feature is
disabled in this memory
configuration.