2. List of Windows Event Logs
Express5800/R120f-2E, T120f Maintenance Guide
203
Chapter 3 Appendix
24
mlx4_bus
Warning
MLX4_SF_32_0_0:
Problem - The port was configured to use auto sensing for deciding the
port type. Port * failed to detect the port type automatically.
Impact - As a result the port is being started as an IB port (unless the port
is ETH only). This may cause a connection problem if the other side is an
ETH port.
Reason and suggestion to fix - This problem may happen since the
computer is connected back to back or the cable is unplugged.
To solve this issue connect the port to a switch or define the port type
explicitly (IB or ETH) instead of auto.
When starting system with
N8104-146/147 (InfiniBand card)
connected
If Auto Negotiation fails in InfiniBand connection environment
(e.g., InfiniBand cable is not connected), the port works as IB port.
Thus, this event does not affect system operation.
27
ixgbi
Warning
Intel(R) Ethernet Controller X540-AT2 #xx
Network link is disconnected.
When installing an OS
This event does not affect system operation.
27
ixgbt
Warning
Intel(R) Ethernet Controller X540-AT2 #xx
Network link is disconnected.
When starting system, or applying
Starter Pack
This event does not affect system operation.
46
volmgr
Error
Crash dump initialization failed!
When installing an OS
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2756313
134
Microsoft-Windows-
Time-Service
Warning
NtpClient was unable to set a manual peer to use as a time source
because of a DNS resolution error on 'time.windows.com,0x9'. NtpClient
will try again in 15 minutes and double the reattempt interval thereafter.
When installing an OS, starting system,
or applying Starter Pack
If it is not registered after connecting to the Internet, there is no problem
with system operation.
153
disk
Warning
The I/O operation at the logical block address for disk was retried.
•
The on-screen indication may differ depending on system
environment.
•
The character string of this event may not be displayed correctly,
however, it does not affect the system operation.
When creating logical drive by Universal
RAID Utility
If this event is logged when creating a logical drive by Universal RAID
Utility, there is no problem in system operation.
The character string of the event will be correctly displayed by applying
the Microsoft's update program on the following site:
http://support.microsoft.com/kb/2925479
1500
SNMP
Error
The SNMP Service encountered an error while accessing the registry
key
SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfigurat
ion.
When installing an OS
If this event is logged only when SNMP is enabled and does not occur
repeatedly, there is no problem with system operation.
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2002303/
7023
Service Control
Manager
Error
The IP Helper service terminated with the following error:
The service cannot be started, either because it is disabled or because
there are no enabled devices associated with it.
When installing an OS
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
