NEC Express5800/T120a-E N8100-1531F, Руководство пользователя, Страница: 54 / 542

2-24 General Description
When you fail to eject:
When you fail to eject the tray with the Open/Close button and take out the disc from the server,
follow the procedure below.
1.
Press the POWER switch to power off the server. (The POWER/SLEEP lamp goes off.)
2.
Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length (a
straightened large paper clip will make a substitute) into the emergency hole on the front
of the optical disk drive and gently push it in until the tray is ejected.
IMPORTANT:
„
Do not use a toothpick or plastic stick that is easy to break.
„
If the above procedure does not let you take out the DVD/CD-ROM,
contact your service representative.
3.
Hold the tray and pull it out.
4.
Take out the disc.
5.
Push the tray back into position.
Emergency hole